Our Microbial Air Samplers and Controllers are designed to operate in a variety of critical environments including LAF Hoods, BSCs, Isolators, Sterility Chambers, Fill Lines, Bulk Production Areas and Compressed Air/Gas Systems, but are practical for use in almost any environment.

The Versatile 100 (V100), a new addition to the EMTEK line in 2009, offers a high level of versatility in microbial air sampling capabilities.

• Operates R2S, RAS, RCG and SCS Samplers
• Color LCD with Touch Screen Interface
• IR Remote Control (Start/Stop/Rest, Pause/Resume
• On Screen Test Plate Sample Tracking
• Mass Flow Controlled Sample Rates @  28.3, 50 & 100 LPM
• Operation of Samplers up to 100 Feet, as follows:
• 28.3 LPM up to 100 Feet
• 50  LPM up to 75 Feet
• 100 LPM up to 30 Feet
• 0-60 Minutes of Active Monitoring per Test Period
• Custom Test Delay, Hold and Run Programability
• Test Period Pause/Resume Capability
• On Board Label Printer Outputs Key Sample Parameters
• 500 Sample Memory Buffer
• Ethernet and USB Connectivity for Data Downloads 
• Maintains 300 Sample Location Entries
• Easily sanitizble Kydex TM / 316SS Instrument Case
• Easily portable at only 12 pounds  
• Extendable/Retractable handle for easy transport
• 0.2 micron Filtered HEPA Exhaust
• Operates at 115 VAC @ 60Hz and 220 VAC @ 50Hz
• Only 10” L X 8” W X 7” H
• Power Cable/Vacuum Line Assembly 6’ or 12’ (Up to 75’)

The R2S Microbial Air Sampler incorporates industry standard Slit-to-Agar methodology with comparable microbial recovery/sensitivity, offering a highly accurate analysis of air quality.  The R2S is designed for monitoring clean rooms, LAF Hoods and Isolators, but can be employed for monitoring in virtually any critical environment. It is designed to allow for sanitization of all surfaces exposed to the environment while its streamlined design affords minimal disruptive effects on Laminar Airflow in critical environments

• Constructed of Aluminum / 316 Stainless Steel
• Exterior Finish of White Epoxy/Polyester Coating
• Clear Polycarbonate Dome Assembly w/Distance Gauge
• Weight of 3.25 Pounds
• Dimensions of 5.5" Height x 5" Diameter
• Turntable Motor is Synchronous (R2SC) or Stepper (V100)
• Base is Chemically Sanitizable, Dome/Seal Autoclavable
• From 0-60 Minutes of Monitoring per Sample Cycle
• Operates at Sample Rates of 28.3, 50 & 100 LPM
• Works with Both the V100 and R2SC Controllers
• Generates virtually no particulate matter
• Uses standard 90mm Test Plates
• Allows for the estimated time of organismal recovery
• Works with Both the V100 and R2SC Controllers

The Remote Compressed Gas/Confined Space Sampler (RCG) is a remote Slit-to-Agar Impaction sampling device which allows for sampling of compressed air and gas systems, and critical areas where a sampling device cannot be directly placed.

• Constructed of Aluminum / 316 Stainless Steel
• Exterior Finish of White Epoxy/Polyester Coating
• Clear Polycarbonate Dome
• Aluminum Sample Inlet and 316L SS Sanitary Inlet Attachment
• 316 SS Sanitary Clamp, Seal, Sanitary Barb and Vacuum Tubing
• Dome Retention Assembly of Aluminum, 316 SS and Tubing
• Weight of 4 Pounds
• Dimensions of 7.5" Height x 5" Diameter
• Base is Chemically Sanitizable, Dome/Seal Autoclavable
• Turntable Motor is Synchronous (R2SC) or Stepper (V100)
• From 0-60 Minutes of Monitoring per Sample Cycle
• Operates at Sample Rate of 28.3 LPM (1 CFM)
• Works with Both the V100 and R2SC Controllers

The Remote-Autoclavable Sampler is a Sieve Impactor Sampler with microbial recovery comparable to a Slit-to-Agar Air Samplers.

• Constructed of 316 L SS with Blue Fluorosilicone Seals
• May be Sterilized by Autoclave, or Chemically Santized/Sterilized
• Only 1.5" Tall and 4.25" in Diameter
• Seal Set to Assure Correct Inlet Distance from Test Plate
• From 0-60 Minutes of Monitoring per Sample Cycle
• Operates at Sample Rates of 28.3, 50 & 100 LPM
• Works with Both the V100 and R2SC Controllers

(Currently in Development)

The Sterile Cassette System (SCS) incorporates the EMTEK single use, sterile, Slit-to-Agar Impaction Sampling Cassette (Patent Pending). The Sterile Cassettes (SC) will come double bagged and sterile irradiated. This self contained sampling cassette is ideal for your most critical areas.

For operation the cassette is removed from its packaging and placed on the SC Base assembly, which supplies vacuum and turntable rotation for the cassette, from the V100 or R2SC Controllers.  The desired sample inlet for either a 28.3 or 100 LPM sample rate is uncovered and then sampling is performed.  The inlet seal is then replaced and the plate is packaged for transport to the lab for incubation.

• SC Base Constructed of Aluminum / 316 SS
• Exterior finish of White Epoxy/Polyester Coating
• Blue Fluorosilicone O-Ring Seals
• Weight of 2.5 Pounds
• Dimensions of 3.5" Height x 4.25" Diameter
• Base is Chemically Sanitizable
• From 0-60 minutes of monitoring per sample cylce
• Operates at Sample Rates of 28.3 & 100 LPM
• Sterile Cassette w/32 mL media fill of TSA
• Cassette is 0.75” H x 3.75” OD

Due to frequent inquiries, The High Pressure Diffuser assists in the testing of compressed air/gas systems for total air particulates. This diffuser can be used in conjunction with almost any Laser Particle Counter (LPC) on the market with a 1 CFM, or 28.3 LPM Flow Rate for testing of particles down to 0.3 microns.

With the three piece construction of electro-polished 316SS, the unit itself generates virtually no particulate matter. It is ideal for accurate particulate monitoring of your Compressed Air and Gas Systems.